Back to Top

1
Hi, Guest!
Rema Tip Top SC2000 Cement

Rema Tip Top SC2000 Cement

Update Terakhir 28 / 02 / 2023
Minimal Pembelian 1 Unit

Harga

CALL
Bagikan
DESKRIPSI PRODUK

Detail Rema Tip Top SC2000 Cement

Rema Tip Top SC2000 Cement - PT. Sarana Teknik Indonesia
REMA SC2000 is a two component, room temperature curing chloroprene based liquid rubber adhesive that, when catalyzed with the appropriate amount of UTR20 Hardener, yields high strength adhesions. REMA SC2000 is ideal for use in lining installations, when bonding rubber to rubber, rubber to fabric, rubber to steel, rubber to concrete, fiberglass, and urethane, as well as the splicing and repair of fabric conveyor belting.

Repair to existing rubber lined vessels and rubber components are also recommended.

Mixing instructions
The REMA SC2000 cement system is composed of cement and hardener in the ratio of 1 Kg of cement to 40 grams of hardener. These two components must be thoroughly mixed (stirred). The mixed portion should be used within 2 hours.

General Rubber Lining Environmental Conditions
Before any sandblasting, application of metal primer, adhesives or application of lining material the ambient temperature and that of the substrate must be at least + 50° Fahrenheit with a maximum temperature of + 104° to +113° Fahrenheit.

The Relative Humidity should not exceed 80% during the entire lining procedure. The substrate temperature must be a minimum of 5 degrees higher than that of the dew point. Relative humidity, ambient temperature, substrate temperature and dew point must be recorded prior to start of project and at three hour intervals thereafter.

LEM EPOXY